Superlift K876 Suspension Lift Kit 4" Ford F-250/F-350 11-16 (Shadow Shocks)

Product Fits These Vehicles

2011-2016 Ford F-250 Super Duty DIESEL

2011-2016 Ford F-350 Super Duty DIESEL

This is a complete coil spring suspension lift kit for the 2011-2016 Ford F-250/F-350 4WD – diesel engine

Provides 4” lift height

Includes track bar and radius arm drop brackets, rear blocks, front and rear Superlift shocks or front and rear 5100 Series Bilstein shocks or front and rear Fox 2.0 Shocks

What does it include?

Front coil springs, track bar bracket, radius arm brackets, sway bar correction, shocks, rear block and u-bolt kit, and all hardware required specific to the 2011-2016 4WD Ford F-250 DIESEL ENGINE

Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation

Superlift Suspension Systems now available with Superlift Shocks OR Bilstein Shocks OR Fox® Shocks:

This 4” Lift for the 2011-2016 Ford Super Duty F-250 | F-350 4WD features Superlift’s engine specific coil springs to ensure proper lift height and maintain factory ride quality.  Radius arm lowering brackets are used to restore proper caster angle and alignment. Other components included with this 4-inch suspension system are front compression travel-stop relocation brackets, track bar relocation bracket, front anti-sway bar extensions, and steering stabilizer bracket.  Rear lift is achieved by 2.5 inch blocks.

OEM CAD models and the latest 3D design software were used to precision engineer a suspension system that includes a track bar relocation bracket, front sway bar correction, bump stop extension brackets, brake hose relocation brackets.

Complete your 4-inch Ford F-250 | F-350 with the most extensive variety of shocks on the suspension market.  Shocks for this kit are available in the following: Superlift OR Bilstein 5100 Series OR Fox Performance Series 2.0 IFP Shocks.

Features:

Replacement Front coil springs improve ride quality while rear blocks maintain load capacity

Radius Arm lowering brackets

Front Compression Travel-Stop Brackets prevent suspension over-compression

Track bar relocation bracket prevents stud bind, resulting roll and yaw, and steering wheel kick

Threaded front anti-sway extensions do not require cutting or welding

Front and Rear Shock Options: Superlift Shocks OR Bilstein® 5100 Series Shocks OR Fox® Performance Series 2.0 IFP Shocks

Backed by our limited lifetime warranty

Benefits:

Aligns to OEM specifications

Maintains ride quality and handling characteristics

NOTES:

If equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required.  Part # 9649

This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250 | F-350 with the factory 1 7/8 inch blocks WITHOUT top mount overloads.  If your Ford is equipped with top is equipped with the factory 3.71 inch blocks or top mount overloads, a long rear u-bolt will be required.  For Super duty’s equipped with 1-7/8 inch blocks and top mount overloads, part # 11724 will need to be purchased in addition to the lift kit.  If the truck is equipped with 371 inch block and top mount overloads, part # 11734  is required.

TIRE & WHEEL INFO

Tire        Wheel   Backspacing        Offset

35 x 12.5              17 x 9    4.5          -

35 x 12.5              18 x 9    4.5          -

35 x 12.5              20 x 9    4.5          -

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers` wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.