Superlift K796F Suspension Lift Kit 4" Ford F-250/F-350 05-07 (Fox 2.0 Shocks)

Product Fits These Vehicles

2005-2007 Ford F-250 Super Duty DIESEL

2005-2007 Ford F-350 Super Duty DIESEL

This is a complete coil spring lift kit for the 2005-2007 Ford F-250/F-350 – diesel engine

Provides 4” lift height

Includes track bar and radius arm relocation brackets, front and rear Superlift shocks or Front and rear 5100 Series Bilstein shocks or Front and Rear Fox Shocks

What does it include?

Front coil springs, track bar bracket, radius arm brackets, sway bar correction, shocks, rear block and u-bolt kit, and all hardware required specific to the 2005-2007 4wd Ford F-250 | F-350 DIESEL

Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation

Superlift Suspension Systems now available with Superlift Shocks OR Bilstein Shocks OR Fox® Shocks:

This 4” Lift for the 2005-2007 Ford Super Duty F-250 | F-350 4WD features Superlift’s engine specific coil springs to ensure proper lift height and maintain factory ride quality.  Radius arm drop brackets are used to restore proper caster angle and alignment. Other components included with this 4-inch suspension system are front compression travel-stop relocation brackets, track bar relocation bracket, front anti-sway bar extensions, and steering stabilizer bracket.  Rear lift is acheieved by 2.5 inch blocks.

Complete your 4-inch Ford F-250 | F-350 with the most extensive variety of shocks on the suspension market.  Shocks for this kit are available in the following: Superlift Shocks OR Bilstein 5100 Series OR Fox Performance Series 2.0 IFP Shocks.

Features:

Replacement Front coil springs improve ride quality while rear blocks maintain load capacity

Radius Arm Drop Brackets

Front Compression Travel-Stop Brackets prevent suspension over-compression

Track bar relocation bracket prevents stud bind, resulting roll and yaw, and steering wheel kick

Threaded front anti-sway extensions do not require cutting or welding

Front and Rear Shock Options: Superlift Shocks OR Bilstein® 5100 Series Shocks OR Fox® Performance Series 2.0 IFP Shocks

Backed by our limited lifetime warranty

Benefits:

Aligns to OEM specifications

Maintains ride quality and handling characteristics

NOTES:

If equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required.  Part # 9649

Factory rear overload springs cannot be retained if replacements rear spring are used

Dually Applications may require different u-bolts

For Super duty’s equipped with top mount overloads, a different u-bolt is required. Part # 11674 will need or replace block kit with part #11694

TIRE & WHEEL INFO

Tire        Wheel   Backspacing        Offset

35 x 12.5              17 x 9    4.5          -

35 x 12.5              18 x 9    4.5          -

35 x 12.5              20 x 9    4.5          -

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers` wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.